3831843412.jpg

ASEAN Conference on Additive Manufacturing

3D PRINTING: REVOLUTIONIZING THE MANUFACTURING INDUSTRY

Hybrid Event
Oct 28-29, 2021
 

The Conference

The 2021 ASEAN Conference on Additive Manufacturing with theme “3D Printing: Revolutionizing the Manufacturing Industry” is sponsored by the Advanced Manufacturing Center of the Philippines and aims to bring together students, experts, enthusiast and additive manufacturing stakeholders in the ASEAN region and the world for possible collaboration and sharing of knowledge on advances in research, materials, prototyping and application of Additive Manufacturing including COVID-19 responses of the 3D Printing Community.

 

It will be held virtually on October 28-29, 2021 with special guest experts in the field from Singapore, United States of America and Canada. The conference will also be the venue for the Winnovation contest to recognize exemplary and innovative designs in architectural/structural, industrial/functional and aesthetics and novel objects category using 3D Printing Technology.

Speakers

Proud to bring inspirational speakers from across the globe

Call for Papers

Important Notice
  1. All paper submission are FREE

  2. Authors/co-authors can proceed with the registration after final papers are accepted.

  3. All submissions should be within FIVE Pages including all figures, tables, and references.

  4. One regular registration with one or more additional papers gets only one proceeding.

  5. At least ONE author for each accepted final paper must register.

ACAM2021 POSTER SEPT 18 DEADLINEpng.png
 
Image by The Climate Reality Project

Submission of Papers

Submission Methods

Full Paper (Presentation and Publication)

Accepted full paper will be invited to give an oral presentation at the conference and be published in the conference proceedings. The proceedings will be published in full text in a periodical on www.scientific.net

Authors of accepted full paper have an option for their work to be published on Key Engineering Materials

Page Requirements

Each paper should have no less than 4 pages normally, including all figures, tables, and references.

Submissions should be within FIVE pages.

 
 
3D Printing

CONFERENCE SCHEDULE

OCTOBER - 2021

28

Thursday
7:00-9:00 AM
Admission of Participants
9:00-9:05 AM
Prayer
National Anthem
DOST-ITDI Chorale
9:05-9:10 AM
Opening Remarks
Dr. Annabelle Briones
Director, DOST-ITDI
9:10-9:30 AM
Welcome Remarks
Dr. Rowena Cristina Guevara
Undersecretary for Research & Development, DOST
9:30-10:15 AM
Keynote Speaker:
Additive Manufacturing in the Philippines
Hon. Fortunato dela Peña
Secretary, DOST
10:15-10:45 AM
Plenary Lecture 1:
High Performance Polymers and Nanostructured Materials in 3D Printing
Dr. Rigoberto Advincula
Department of Chemical and Biomolecular Engineering, The University of Tennessee, Knoxville, USA
10:45-11:15 AM
Plenary Lecture 2:
3D Food Printing: The New AM Frontier
Dr. Chee Kai Chua
Singapore University of Technology and Design, Singapore
11:15-11:45 AM
Plenary Lecture 3:
Physical and mechanical metallurgy of new commercial alloys designed for additive manufacturing
Dr. Clodualdo Aranas Jr.
Assistant Professor
University of New Brunswick, Canada
11:45-12:15 AM
Plenary Lecture 4:
"3D Printing Poised to Leap Frog Barriers in Medicine" Present and Future Applications
Dr. Rafael Bundoc
Philippine General Hospital
11:45-1:00 PM
Lunch/Exhibit and Poster Session
Parallel Sessions
A. Design and Simulation, Materials development and prototyping, and Industry Application
Moderator: Persia Ada de Yro, PhD
1:00-1:30 PM
Invited Speaker:
Recent progress of 3D food printing of milk-based, and coconut cream products at room temperature
Lee Cheng Pau
PhD Candidate
Engineering Product Development
Singapore University of Technology and Design
1:30-2:00 PM
Invited Speaker:
Dual-Metal Laser Powder Bed Fusion of Fe- and Co-based Alloys
Engr. Jubert Pasco
Department of Mechanical Engineering, University of New Brunswick, Fredericton, New Brunswick, Canada
2:00-2:15 PM
The Role of Heat Treatment on the Texture Evolution of Additively Manufactured M789 Steel
Kanwal Chadha
Department of Mechanical Engineering, University of New Brunswick, Canada
2:15-2:30 PM
Heat Treatment of Multi-material Additively Manufactured Maraging Steel and Stellite Alloy
Engr. Jubert Pasco
Department of Mechanical Engineering, University of New Brunswick, Canada
2:30-2:45 PM
Interfacial Properties of Additively Manufactured M789 Steel on Wrought N709 Alloy
Kudakwashe Nyamuchiwa
Department of Mechanical Engineering,
University of New Brunswick, Canada
2:45-3:00 PM
Selective Laser Melting of Copper Alloy for Moulding Applications
Lu Zhen
Singapore Centre for 3D Printing, School of Mechanical & Aerospace Engineering, Nanyang Technological University, Singapore
3:00-3:15 PM
Finite Element Analysis and Material Selection of 3DPrinted External Metacarpal Fixator Clamp
Leif Oliver Coronado
Department of Science and Technology - Metals Industry Research and Development Center (DOST-MIRDC) General Santos Avenue Bicutan, 1631 Taguig, Philippines
3:15-3:30 PM
Additive Manufacturing Applications in Maritime Education
Elliot Gonzaga
Maritime Academy of Asia and the Pacific, Mariveles, Bataan, 2105, Philippines
3:30-3:45 PM
Effect of Particle Size, Raster Angle and Chemical Treatment on the Mechanical Properties of 3D Printed PLA-Coco Coir Composites
Paul Eric C. Maglalang
Industrial Technology Development Institute – Department of Science and Technology, DOST Compd. General Santos Avenue, Bicutan, Taguig City, 1631 Philippines
3:45-4:00 PM
Assessment of Microstructural and Mechanical Properties of 420 Stainless Steel Fabricated by Laser Powder Bed Fusion
Harveen Bongao
School of Graduate Studies, MAPUA University, Philippines
4:00-4:15 PM
Quasi-Static and Dynamic Mechanical Response of Alloy 625 Fabricated Using Laser Powder Bed Fusion
Jonathan Lewis
Department of Mechanical Engineering, University of New Brunswick, Fredericton, New Brunswick, Canada
B. Biomedical, functional and structural application and COVID-19 related sessions
Moderator: Persia Ada de Yro, PhD
1:00-1:30 PM
Invited Speaker:
Colloids 3D printed based on nanocellulose gels
Tania Lara E. Ceniceros, PhD
Center for Research in Advanced Materials
(Centro de Investigación en Materiales Avanzados, CIMAV)
1:30-2:00 PM
Invited Speaker:
Superhydrophobic 3D printed pillar structures for the multi-reaction platforms design
José Bonilla-Cruz
Professor of Polymer & Materials Science
CIMAV, S.C.-Unidad Monterrey
2:00-2:15 PM
PROJECT LINGAP LANGHAP: Low-cost 3D Printed Air Purifier System using Agricultural Waste-Based Activated Carbon Filter
Jan Paolo Pineda
Philippine Science High School, Central Luzon Campus, DOST, Lily Hill, Clark Freeport Zone, Mabalacat City, 2009, Philippines
2:15-2:30 PM
3D Printing in the Water Treatment Industry
Jing Wee Koo
Interdisciplinary Graduate Programme, Nanyang Technological University, Nanyang Avenue, Singapore
2:30-2:45 PM
Fuzzy TOPSIS Application for the Selection of External Fixator Materials for Tibia Fractures
Lora Jose Hernandez
Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines, Diliman, Quezon City 1101, Philippines
2:45-3:00 PM
3D Printing of PDMS-based Membranes for Carbon Capture Applications
Dianne B. Gutierrez
Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines Diliman, Quezon City, 1101, Philippines
3:00-3:15 PM
The Influence of Hot Isostatic Pressing on Microstructural and Mechanical Properties of 17-4 PH Steel Manufactured by Laser Powder Bed Fusion
Jagannadh Sripada
Nanocomposites and Mechanics Laboratory (NCM Lab), University of New Brunswick, Fredericton, NB, Canada
3:15-3:30 PM
Design and simulation of 3D-printed wastewater filter column prototypes with various flow configurations
Jose Bernardo L. Padaca III
Metals Industry Research and Development Center, Department of Science and Technology, Philippines
3:30-3:45 PM
3D Printing Supporting through the COVID-19 Pandemic Crisis
Hong Wei Tan
Engineering Product Development (EPD) Pillar, Singapore University of Technology and Design (SUTD), 8 Somapah Road, Singapore 487372, Singapore
3:45-4:00 PM
Effect of Printing Parameters on the Void Content of Fused Filament Fabricated PEEK
Carlo S. Emolaga
Materials Science Division, Industrial Technology Development Institute, Department of Science and Technology, Bicutan, Taguig City, Metro Manila, Philippines
4:00-4:15 PM
Influence of Philippine Halloysite on Thermal and Mechanical Properties of Poly (lactic acid) Filament for FDM 3D Printing Applications
Sharyjel Cayabyab
Materials Development Laboratory, AMCEN, Materials Science Division, Industrial Technology Development Institute, Department of Science and Technology, Bicutan, Taguig City, Metro Manila, Philippines
ACAM 2021 Hands-on Workshop and Company Presentations
4:30-5:00 PM
From Powder to Part: Zeiss Microscopy and Measurement Solutions for Additive Manufacturing
Sky Xie
Senior Regional Product and Application Sales Specialist of Zeiss Microscopy
5:00-5:30 PM
From Prototype to Production: Why SLA is the Best Choice for your 3D Printing Application
Mr. Enrico De la Paz
Sr. Applications Engineer/ AM - CIM Technologies, Inc.

Mr. Axcel Jene Gonzales
System Sales Consultant - CIM Technologies, Inc.
5:30-6:00 PM
Cypher Ultra High Performance AFM with blueDriveTM Tapping for Additive Manufacturing
Simon Fong
Territory Sales Manager (ROA)
Oxford Instruments Asylum Research, Inc.
6:00-6:30 PM
Additive Manufacturing Simulation with Metal & Plastic
Mr. Kemarol Ibrahim
Technical and BD a manager, ASEAN, Hexagon MSC Software, Malaysia
6:30-7:30 PM
Exhibit and Poster Session
7:30-10:00 PM
Banquet/Socials
3D Printing Fiber

29

Friday
8:45-9:00 AM
Welcome Remarks
Dr. Leah Buendia
Assistant Secretary for International Cooperation
9:00-9:30 AM
Plenary Lecture 1:
Additive Manufacturing Standards in the Philippines
Dr. Blessie A. Basilia
RD Leader, DOST-ITDI-MSD-MATDEV
9:30-10:00 AM
Plenary Lecture 2:
AM Standards Development in Singapore – State of the Art Review
Dr. Chee Kai Chua
Singapore University of Technology and Design, Singapore
10:00-10:30 AM
Plenary Lecture 3:
Additive Manufacturing Standards in India
Dr. L. Jyothish Kumar
President
Additive Manufacturing Society of India
10:30-11:00 AM
Plenary Lecture 4:
Navigating the Additive Manufacturing Standards Landscape
Dr. Alex Liu
Head of Additive Manufacturing Programs – APAC region, ASTM International
11:00-11:30 AM
Plenary Lecture 5:
3D Print it:  Light and Right
Mr. Varadarajan Rajagopalan
Sr. Director
ASEAN, MSC Software, Singapore
11:30-1:00 PM
Lunch/Exhibit and Poster Session
1:00-1:30 PM
Plenary Lecture 6:
Print Me An Organ! Why We Are Not There Yet
Dr. Ng Wei Long
Research Assistant Professor
HP-NTU Digital Manufacturing Corporate Lab, Nanyang Technological University (NTU)
1:30-2:00 PM
Plenary Lecture 7:
Modelling and Simulation of Metal Additive Manufacturing
Dr. Yupiter Harangan Prasada Manurung
Universiti Teknologi MARA (UiTM)
2:00-2:30 PM
Plenary Lecture 8:
Using In-situ Alloying to Overcome Material Limitations in Metal Additive Manufacturing
Dr. Sing Swee Leong
National University of Singapore (NUS)
2:30-4:00 PM
Winnovation Awarding Ceremonies
  • Winnovation video presentation
  • Background of Winnovation
  • Introduction of Judges
  • Presentation of Mechanics and Criteria for Judging
  • Video Presentation of Entries of the Industrial(Top 3)
  • Awarding of Winners (industrial)
  • Video Presentation of Entries of the Aesthetics(Top 3)
  • Awarding of Winners (aesthetics)
  • Awarding of Winner People’s Choice w/ video presentation
  • Congratulatory Messages
Engr. Fred Liza
Engr. Marianito T. Margarito
Dr. Blessie A. Basilia
4:00-5:00 PM
ACAM 2021 Closing Ceremonies
  • Introduction of Judges
  • Awarding of Best Poster Presentation
  • Awarding of Best Oral Paper Presentation
  • Closing Remarks
Josefina R. Celorico, RCh
OIC, Office of the Chief, Materials Science Division, Industrial Technology Development Institute, Department of Science and Technology

Sponsors